Chicago Electric 4 DRY TILE SAW 38941 - Manual (Page 12)

Page 12 SKU 38941 For technical questions, please call 1-800-444-3353.
Warning:
When using the Wet Cutting Attachment, extreme care must be taken to
insure that the saw’s electrical cord is positioned to remain dry and free from
the water hose at all times. The operator must be aware that an extreme electri-
cal hazard can occur if the cord, or the operator becomes wet while using this
electric powered tool. Care and common sense must be used in planning a safe
work area and in finding a safe location for the water bucket described below.
Gravity Feed Instructions
1. Place a large bucket of water on a stable platform at least five feet above the working area (see above).
2. Remove the hose from the Water Plug. Insert one end of the Hose into the bucket of water so that it is well
under the top of the water level.
3. Suck on the other end of the Hose until water can be seen flowing down the hose. Reconnect the hose to
the Water Plug.
4. Turn water valve counterclockwise to open and clockwise to close.