4 . connect the handset to the telephone, 5 . check for dial tone – AT&T 950 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 . Connect the handset to the telephone.
Plug the coiled handset cord into the handset jack on the left
side of the phone. Plug the other end of the coiled cord into
the handset, then hang up.
handsetjack
1
o
o
o
o
0
0
o
O Q)(3)@ ®
o @)@(3) n
O @(3)(g)
5 . Check for dial tone.
Lift the handset and listen for a dial tone, if you cannot hear a dial
tone, press B
/VOLUME,
if you still do not hear a dial tone, see
the
In case of difficulty
section on pages 34-36 of your user's
manual, part 2.
Your phone will work immediately after installation using the default feature
settings (See
Default settings
on page 31 of your user's manual, part 2).
O NOTE:
If you subscribe to caller ID services from your local telephone
service provider, you must follow the instructions in
Set home area
code
for your phone to properly recognize and dial calls (see page 5).
You may also need to
Set local area code
(see page 6).