Homelite LM-990932 - Manual (Page 2)

6. The shoe assemblies are to be mounted to the blade with four
(two each skid) 3/8-16 x 1 carriage bolt, lock washers and hex
nuts.
The angle of the blade is adjustable to permit plowing to either the
right or left. Remove the pivot pinandangle the blade to the desired
position. Replace the pin in the hole to secure angle of the blade.
OPERATION
Alternate holes are provided in the blade to permit adjustment of
the shoe assemblies for various types of ground surfaces to be plowed.
The blade should be raised when plowing gravel drives or walks.
Lower the blade when plowing asphalt or concrete drives and walks.
Recommended Equipment
Wheel Weights LM-09904-49
Tire Chains
T-7
T-8 LM-09906-93
LM-09903-01
Note: Loose mounting of chains will make them self cleaning.
42” FB
No. Description Part No. Qty. No. Description Part No. Qty.
1 FRAME-push LM-16 06 5-4 7 1 14 SHOE LM-01070-24 2
2 CLIP-spring LM-81610-45 9 15 PIN-yoke LM-01543-05 1
3 PIN LM-01180-53 4 16 BAR-push LM-16065-79 1
4 SCRJEW-hex hd. cap, 3/8-16, x 1-1/4 LM-09174-00 2 17 ROD-pivot LM-01070-89 1
5 ARM-support LM-16065-46 2 18 COLLAR-set LM-83010-42 1
6 WASHER-lock. 3/8 LM-09169-65 12 19 SCREW-set, 5/16-18 x 3/8 LM-09287-09 1
7 NUT-hex, 3/8-16 LM-09169-50 12 20 TUBE-guide LM-01704-36 1
8 BLADE-42" LM-01070-47 1 21 ROD-lift LM-01767-27 1
9 PIN-pivot LM-16036-01 1 22 NUT-hex, 1/2-20 LM-09194-23 1
10 PIN-king LM-16036-02 1 23 YOKE-end adj. LM-01576-31 1
11 BOLT-carriage, 3/8-16 x 1 LM-09232-32 4
12 BOLT-carriage, 3/8-16 x 3/4 LM-07020-03 6 Accessories
13 PLATE-wear LM-01070-45 1
PAINT-blaek, 12 oz. spray can 22772
ALWAYS FURNISH MODEL AND SERIAL NUMBER WHEN ORDERING PARTS.
HOMELITE'
PRINTED IN U.S.A. \ textronl D I V I S I O N , P O R T C H E S T E R , N . Y . 1 0 5 7 3