Manual selection of audio/video sources, Scanning the audio/video sources – Philips Audio-video selector US2-PH61153 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DVD
Q VIDEOGAME
RECEIVER OR TV
WITH RCA JACKS
AND S-VIDEO
TV WITH
SINGLE "F" JACK
4. In case that there Is no audio/video from “IN 2”, “IN 3” or “IN 4" inputs, the unit will always select the
“IN r input.
5. In case there is no audio/video from any audio/video sources, the unit will stay automatically at cable input.
Manual Selection of Audio/Video Sources:
1. Press “MODE” Key again until the mode led indicator turns off. The unit is now in manual mode.
2. Use “Selecf Key to select audio/video sources in rotation.
3. The LED will indicate which source has been selected.
Scanning the Audio/Video Sources:
1. Press “MODE” Key until the MODE LED indicator is blinking. The unit is now in SCAN mode.
2. The unit will automatically scan the available audio/video sources.
3. The speed of the scan can be adjusted by pressing the “MODE” Key repeatedly and can be monitored by
the blinking of the MODE LED indicator.
Note: You cannot use both the S-Video input and composite video input at the same time. When you use
S-Video input, the video input is automatically turned off.