Philips 27TS54C - Manual (Page 16)

A 7bw that you have looked up
1 V the two-digit Remote Code
Number for your brand of Cable
Converter (on previous page),
you are ready to follow the four
simple steps below.
Please read through steps 1-4
before beginning.
f BEGINS
Press and release the STATUS
j button.
Within thirty seconds after
releasing the STATUS button,
press and release the CBL
System button.
Within thirty seconds after
releasing the CBL System button,
ENTER THE TWO DIGIT
CODE NUMBER for the desired
Converter. The remote is now
ready to send commands to the
Converter.
Point the remote at the
Converter. Press the POWER but­
ton on the remote to turn the
Converter ON.
1 / S mart H elp
it out. The Channel
% and POWER buttons on the
remote should now operate the
Converter.
Remember, if this doesn't work
the first time, repeat steps using
the same remote code number.
If after a second try the remote
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated attempts the code
number method does not work
your Converter, try the "CON­
VERTER SEARCH" method on
page 17.
Cable Converter
16