Philips HP6576-60 - Manual (Page 7)

Cleaning
IMPORTANT
k Always switch the Epilator OFF and remove
plug from electrical outlet and epilator before
cleaning.
I Never immerse this appliance in water.
t Do not use scouring pads, abrasive cleaners or
aggressive liquids such as gasoline or acetone
to clean the Epilator.
► It is essential for hygienic reasons and
optimum performance that the epilating head
and rotating discs are cleaned
after each use.
I Never clean, remove, or replace epilating head
while motor is ON.The rotating discs are not
removable from the epilating head.
I Do not apply pressure or touch rotating discs
with hard objects as this may dent or damage
the discs. If damage occurs, discontinue use
immediately.
Q Remove the epilating head by pressing the
release knob (1) and remove epilating head
from the appliance (2) (Fig. 9).
B Remove loose hairs from the epilating discs
and attachments with the brush (Fig. 10).
Never try to detach the epilating discs from the
appliance.
H Rinse the epilating head thoroughly under
warm tap water while turning the discs with
your thumb (Fig. 11).
□ Shake off excess water (Fig. 12) and dry
epilating head completely with a soft towel.
Do not replace the epilator head onto the
appliance until it is completely dry.
H Place the epilating head back onto the
appliance and press until it snaps into place.
You will hear a click (Fig. 13).
The epilating head only fits onto the appliance in
one direction.
This Epilator has not other user-serviceable parts.
For assistance, call 1 -800-243-7884.