Philips 7P4830W199 - Manual (Page 37)

A Tow that you have completed
1 V
the required connections on
the previous page you are ready to
follow the simple steps shown
below.
Turn the VCR and TV ON.
Place the VCR in the TV mode -
Use the TVA^CR button on
the VCR (or on the TV remote
if it has been set to work with
your VCR - see page 30.)
Place the TV's PIP SOURCE
SELECT control to "VCR/AUX"-
With FEATURES MENU (3
of 3) on screen, move the RED
highlight with the MENU (M)
t b u t t o n s . Then press the
MENU button.
Press the MENU AT and
MENU (M) buttons to
highlight and select the
"VCR/AUX" (»^) item.
<$>
Select the channel on the VCR
to view in the PIP window.
Select the channel on the TV to
view on the main screen.
<§> Press the PIP ON/OFF button
on the remote.
The PIP window should show in
one of the comers of the TV
screen.
S mart H elp
Remember, if you see the
same picture on the main
screen and in the PIP window, you
need to be sure the TV's PIP
Picture Source control (page 39) is
set to "VCR/AUX".
No sound will be heard with the
PIP picture. See page 38 on how
to "SWAP" the PIP picture with
the main screen picture so that
sound can be heard.
Also see the following page on
how to operate other PIP features
with the remote controls
ANTENNA
✓ IVCR/AUXI
VCR IN “TV MODE"
(VCR Indicator Light will go out)
• PIP SOURCE SELECT
PIP INPUT CONTROL SET TO "VCR/AUX"
VCR - FOR PIP CHANNEL
TV - FOR MAIN SCREEN CHANNEL
TV
SELECTED
CHANNEL
IUT» ^2i!!!^
ieri
o
Q
Be sure to point the remote at the
front of the VCR when pressing
VCR function buttons.
37 - IB7893 E001