beautypg.com

Ignition key removal override – Ram Trucks 2015 ProMaster City - Owner Manual User Manual

Page 326

background image

IGNITION KEY REMOVAL OVERRIDE

This vehicle is equipped with a Key Ignition Park Inter-

lock which requires the transmission to be in PARK

before the ignition switch can be turned to the LOCK/

OFF (key removal) position. To remove the key manually,

proceed as follows:
1. Firmly apply the parking brake
2. Remove the Allen Key located in the rear cargo area, in

the tool bag (if equipped) or on the left side in the

cargo box.

3. Unlock the steering column, pull the tilt/telescoping

control handle down.

4. Pull the steering wheel outward until it is in the end of

the travel position, then lock the steering column in

position, push the control handle up until fully en-

gaged.

5. Using the Allen key, undo the lower steering column

cover screws, and remove the lower cover.

6. Pull the release tab downwards using one hand and

with the other one remove the key, sliding it outwards.

Lower Steering Column Screw Locations

324 WHAT TO DO IN EMERGENCIES