Ram Trucks 2015 ProMaster - Owner Manual - Manual (Page 164)

Auto Switch
This function changes the on/off sequence of the radio as
described in the section: ЉTurning the device on and off.Љ
To enable it, turn the ROTARY knob clockwise. The
display will show ЉAUTO ONЉ. To disable it, turn the
ROTARY knob counterclockwise and the display will
show ЉAUTO OFFЉ.
Beep
With this feature is enabled, the radio will emit a beep
when any knob is activated.
Clock settings
When you select this function, the display will show the
clock. To select the field to be set, push or . Turn
the ROTARY knob to adjust the selected field.
Clock
Pushing the DISP button for more than two seconds
enables or disables the clock display. When this feature is
enabled, the display shows ЉCLK ONЉ and the clock is
displayed whenever the ignition is switched on, even if
the radio is off. This function takes priority in the display
whenever you access any of the radio functions. If no
buttons are pushed within 10 seconds, the display will go
back to showing the clock. When this function is dis-
abled, the display shows ЉCLK OFFЉ.
USB Mode (MP3/WMA/AAC)
CAUTION!
To remove devices connected to the USB port, first
select the other audio source. Failure to follow this
procedure can cause damage to the connected device.
(Continued)
162 UNDERSTANDING YOUR INSTRUMENT PANEL