Wingscapes BirdCam Pro - Manual (Page 19)

SECTION 4 - TIMELAPSE
To enter the TIMELAPSE mode, move the Rotary Dial to the TIMELAPSE position.
4.2 OPTIONS - Press the LEFT (<) button to enter the OPTIONS menu. Once in the OPTIONS
Menu, Press LEFT (<) button to move between the option windows. To change the options,
press, (+) or (–) to change the value, and LEFT (<) and RIGHT (>) buttons to move between fields.
Press OK to confirm changes to the option.
4.3 RESET TIMELAPSE OPTIONS - Select this option to
reset Timelapse options to factory defaults.
4.1 TEST PHOTO - Press OK button to take test photo with
current settings. The display will show a countdown and then
capture a photo. This photo will then appear on the display for
review until the OK button is pressed again.
4.3.1 TIMELAPSE INTERVAL - Press LEFT (<) button. Press (+)
or (-) buttons to choose between 12 different settings: 24 hours,
12 hours, 6 hours, 3 hours, 1 hour, 30 min, 15 min, 10 min, 5 min,
1 min, 30 sec and 10 sec. Press the OK button to save changes.
Page 19 BirdCam PRO User Guide