Electrical connections – Winco W15PTOS/C User Manual

Page 7

Text mode
Original mode

Page 5

60706-178-6115

ELECTRICAL CONNECTIONS

CAUTION:
Only qualified electricians should install electrical
wiring. Wiring must conform to all applicable na-
tional, state, and local codes. (Reference: National
Fire Protection Association Manual No. 70, National
Electrical Code.)

DANGER: PERSONAL INJURY
IF THE GENERATOR IS TO BE USED AS A
STANDBY POWER SOURCE, A SPECIAL DISCON-
NECT SWITCH MUST BE INSTALLED TO SEPA-
RATE THE GENERATOR AND THE COMMERCIAL
POWER LINES. THE DISCONNECT MUST ISO-
LATE THE GENERATOR FROM THE COMMERCIAL
POWER LINES AND THE LOAD WHEN THE GEN-
ERATOR IS ON STANDBY, AND MUST ISOLATE
THE COMMERCIAL POWER LINES FROM THE
LOAD AND THE GENERATOR WHEN THE GEN-
ERATOR IS SUPPLYING POWER. SEE FIGURE 6

Figure 6