Winco CSADL6000IE/E - Manual (Page 9)

Page 7 60707-122 9160-00
TROUBLESHOOTING HINTS
PROBLEM (SYMPTOMS) POSSIBLE CAUSES
——————————————————————————
Won’t Start *Low oil level.
*Fouled spark plug.
*Out of fuel.
*Stop switch in stop position.
*Gummed up fuel system.
*Fuel turned off.
——————————————————————————
Voltage too low *Engine speed is too low.
*Generator overloaded.
*Defective capacitor.
*Defective stator.
*Defective rotor (field).
——————————————————————————
Circuit Breaker *Over Loaded.
Trips *Defective receptacle.
*Defective circuit breaker
*Too small/long of drop cord.
——————————————————————————
Voltage too high *Engine speed is too high.
——————————————————————————
Generator *Overloaded.
overheating *Insufficient ventilation.
——————————————————————————
No output voltage *Short in load (disconnect).
*Broken or loose wire.
*Defective receptacle.
*No residual magnetism
(in generator).
*Defective stator.
*Defective rotor (field).
*Defective capacitor.
*Defective diode.
*Circuit breaker off or defective.
——————————————————————————