Winco 4-Wheel Dolly Kit Assembly Instructions For 6kW Gen-Sets - Manual (Page 3)

3 12111-00 16199-009I
Bolt one axle bracket (ref.3) on the engine end of the cradle and one axle bracket
(ref.3) to the generator end of the cradle using hardware (ref. 7, 9, 8). Make sure
the axle brackets are on the inside of the cradle cross-members.
Cradle depicted may not match your model. •
•
STEP 2
STEP 3
Remove the generator from the pallet or box and block generator up 8 to 10 inch-
es to gain access to the bottom of the cradle assembly. A lifting jack or hoist may
also be used if available. •
ENGINE END