Vizualogic CiG-Blue Owner's Manual - Manual (Page 4)

CiG-Blue™ Bluetooth In-C
ar Handsfr
ee S
y
stem U
ser Manual
Pairing Guide
Pairing your phone is simple, just follow these steps :
(The system can pair up to 3 phones)
1. Hold button down until you hear 3 short beeps, after 12 seconds.
(This puts the system into pairing mode for 5 minutes)
2. Go to settings or connections in your phone menu.
3. Find Bluetooth menu.
4. Turn Bluetooth on.
Your phone will have a function like:
Search for new device New Handsfree Search
Depending on the phone, the selection will vary, select the function and the phone will
search for the bluetooth kit.
Your Phone will then display all the bluetooth devices in the area. Select
CiG-Blue. Enter the passcode 1234. the system will let out a positive bleep to
advise you are now paired.
To delete all paired phones: hold button for 15 seconds.
IMPORTANT NOKIA USERS if you want the kit to connect automatically
you must now select Paired Devices and select the CiG-Blue and change
default to: Device Authorised Yes, or Conn Auth Yes or
Auto-Conn. Without Confirmation Yes
This allows your phone to automatically connect when you start the car.
Pairing Troubleshooting
Cannot find the Bluetooth
menu Please see the user manual of your phone for assistance on
various phone models.
Phone will not pair
The system can only be paired with 3 phones at one time. To
delete previous pairings, hold the button down until 4 beeps
are heard, and then try again. Sometimes phones have software
problems and need to be reset. Please remove and reinstall your
battery and try again. Try deleting all other devices from your
phone and try again, as you may have exceeded the maximum
number of connections for your handset.
I paired my phone but when
I start the car it does not
connect automatically
See The Pairing Note for Nokia users.