Cobra Electronics XRS 9950 - Manual (Page 20)

Optional Global Position System
Optional GPSL
Nothing Comes Close to a Cobra ® 35
Optional Global Position System
Optional GPSL
34 English
1. Position the GPSL unit before
actually mounting it.
• Connect the USB cable to the
detector and GPSL unit.
• Hold the GPSL unit in place.
• Mark two corners with a pencil
or other non-permanent marker.
2. Mount the GPSL.
• Peel the protective film from
one side of the two fastener
strips and attach them to the
GPSL unit.
• Peel the protective film from the
exposed side of the fastener
strips and press the GPSL unit
to the windshield using the
marks made in step 1.
• Do not pull on the GPSL for
20 minutes.
TH IS SU RF ACE
TO WA RD
S
SKY
3. Connect the USB cable between
the GPSL and the detector.
NOTE
The fastener strips cannot be
easily removed. The adhesive
strength increases with the
passage of time.
Windshield Mounting
1. Position the GPSL unit before
actually mounting it.
• Connect the USB cable to the
detector and GPSL unit.
• Hold the GPSL unit in place.
• Mark two corners with a pencil
or other non-permanent marker.
2. Mount the GPSL.
• Peel the protective film from
one side of the two fastener
strips and attach them to the
GPSL unit.
• Peel the protective film from
the exposed side of the fastener
strips and press the GPSL unit
to the dashboard using the
marks made in step 1.
• Do not pull on the GPSL for
20 minutes.
TH IS SU RFAC
E
TO WA RD S SKY
THIS
SURFACE
TOWARDS
SKY
3. Connect the USB cable between
the GPSL and the detector.
NOTE
The fastener strips cannot be
easily removed. The adhesive
strength increases with the
passage of time.
Dashboard Mounting