Cary Audio Design CD 303T SACD - Manual (Page 12)

CONTROLS AND DISPLAYS
8. RS 232 JACK
Use this jack for connection to computer control.
9. POWER INPUT (AC IN)
Connect to AC mains using the included power supply cord.
10. SOFTWARE UPGRADE PORT
11. DIGITAL OUTPUT JACK (TOSLINK)
44.1 kHz – 192 kHz digital data output from this jack.
With SACD discs, no digital signals are delivered from Super Audio CD discs.
12. DIGITAL OUTPUT JACK (COAXIAL)
44.1 kHz - 192 kHz digital data output from this jack.
With SACD discs, no digital signals are delivered from Super Audio CD discs.
13. DIGITAL OUTPUT JACK (AES/EBU)
44.1 kHz-192 kHz digital data output from this jack.
With SACD discs, no digital signals are delivered from Super Audio CD discs.
PIN ASSIGNMENT
The pin assignments of all of the XLR-type male analog outputs, the XLR-type male
digital output, and XLR-type female digital inputs are as follows:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to the owner's manual for the other components in your audio system to verify that
the XLR pin assignments of its input connectors correspond to the CD 303T SACD
Professional Version. If they are different, wire the XLR cable so that the appropriate
XLR output pin connects to the equivalent XLR input pin.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
11