Cleaning and inspecting the pump heads, Fittings and tubing of the different pump models – VACUUBRAND MZ 8C User Manual
Page 40
page 40 of 52
Cleaning and inspecting the pump heads
+
Service only one side of the pump at a time to avoid the mixing of
parts.
➨
In case, position the pump on edge (place pump onto inlet distributor
or outlet distributor respectively). Support the pump appropriately.
➨
Loosen the union nuts (N) of the hose con-
nections at the pump heads with an open-
ended wrench (w/f 17).
➨
Turn the fittings (Q) with an open-ended
wrench (w/f 14, at outlet w/f 16) to detach
the hoses from the pump heads (1/4 of a
turn at maximum).
+
Do not remove the elbow fittings from the
pump heads; during reassembly a leak may
result.
Inlet side
Fittings and tubing of the different pump models:
ME 16C
MZ 8C
MD 8C
MD 12C
MV 10C