VACUUBRAND VacuuHandControl VHCpro - Manual (Page 14)

page 14 of 36
The surface of the wall has to be smooth, dry
and free of grease.
Remove the protective foil from the adhesive
tape at the wall holder part 1. Align part 1 with
cover directed downward and press firmly on
the wall for 1 minute.
The full load is achieved after 72 h at 20°C.
Alternativly screw part 1 of the wall holder to
the wall using the two screws enclosed in the
delivery.
Assemble part 2 of the wall holder to part 1 and
click into place.
Disassembling
Push both wings of the wall hoder part 2 apart
and silde the part upwards.
1
2
When replacing the adhesive tape to fix the wall holder
we recommend to use the 3M™ VHB™ high performance
connection system 4932P.
3M TM and VHB TM are trade marks or registered trade marks
of 3M.
NOTICE
Assembling the wall holder