True Induction F-IH-01SS - Manual (Page 4)

3
8. A beep will sound when the cooking time has finished, and the appliance switches to standby mode.
9. After cooking is completed, press the ON/OFF button again to turn off the unit.
Notice:
1. The power will completely shut off with 9 second if either (a) the wrong type of cookware is applied or (b) no
cookware is placed on the unit.
2. If the unit be used for 150 minutes under the TEMP or HEAT state, the LED display will show EE code and
sound, then turn off automatically.
3. The Max Timer is 150 minutes per operation.
CLEANING
z Clean after each use. Turn Off, Disconnect plug from power source, and wait until unit has cooled down
before cleaning.
z If the pots/pans are used without being cleaned, this may result in discoloration or stains.
z Do not use benzene, thinner, scrubbing brush or polishing powder to clean any surface on induction cooker.
z Wipe down the unit using a damp cloth
z When needed, use vacuum cleaner to remove dirt from the air intake and exhaust vent. Never insert any
type of metal or iron wire into these two vents
z Never run water over the unit (If water gets inside it will damage & cause unit to malfunction.)
WARNING: an authorized service representative should perform any servicing
TROUBLE SHOOTING
If LED-display shows the error code, please reference to the solution as following
Error Code Cause and Solution
“---“ and the unit sounds
“Dee, Dee, …” There is no cookware or no suitable cookware on the stove.
The power will completely shut off with 9 second if it is no
cookware or wrong type of cookware placed on the unit.
E01 Voltage is under 160V
E02 Voltage is over 270V
E03 The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
E04 The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
E05 The cooking temperature exceed 300℉ .If you use the function
mode “POWER” to cook, the max temperature is 300℉ .If the
cooking temperature exceeds 300℉ , the device shows an error
code. Please power off to eliminate the wrong record and let
the appliance cool down. Then plug the power cord again and
restart. If you would like the cooking temperature exceed
300℉ ,
please use the function mode “TEMP”, the max temperature is
450℉ .
E06 The accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting,
repair and adjustment.
E07 The cooking temperature exceeds 450℉ while using the
function mode “TEMP“. After the device has cooled down, the
appliance will automatically enter standby mode.
E08 You are using unsuitable cookware. Please use the suitable
cookware (with the flat base). Power off to eliminate the wrong
record, plug in the power cord again and restart.