True Induction P3D - Manual (Page 4)

II. Specifications
Power: 1600 Watts
Voltage: 120v / 60Hz
Temperature Range: 150°F - 450°F (exact temperature settings)
Level Selection: Select settings 1 through 10
Max Time: Set timer up to 150 minutes
Material: Glass Ceramic Top
Single Burner Unit Measurements: 12” width x 15” length x 1.2” height
III. How To Use
- Plug the power plug into a standard outlet.
- The ON/OFF switch will light up and the unit will sound to indicate on.
- The device will remain in standby mode, awaiting user direction.
- Place ferromagnetic cookware (with water, oil, or food already inside) on the center of the glass ceramic top center.
- Now press ON/OFF button on the control panel, this will turn the cooktop on. The power display will blink and sound
another indicator.
- The pre-set power level “5” is the default selection as the device turns on.
- Using the +/- keys, you can change the settings at any time, ranging from 1-10. This is considered to be the HEAT func-
tion.
Using the Temperature Setting:
- After the unit is turned on, you can opt to use the TEMP setting. To do this, press the function key labeled TEMP one
time. The pre-set temperature is 270 degrees Fahrenheit.
- Using the +/- keys, you can change the temperature setting at any time. Settings range from 150-450 degrees Fahren-
heit. (Exact temperatures: 150, 180, 210, 240, 270, 300, 330, 360, 390, 420. and 450°F)
2