Traxxas 44054-1 - Manual (Page 5)

NITRO SLASH • 5
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Your Nitro Slash comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to
operate and maintain your model.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on radio
system batteries, see Use the
Right Batteries on page 10.
*Battery and charger style are subject to change and may vary from images.
SUPPLIED TOOLS AND EQUIPMENT
REQUIRED TOOLS AND EQUIPMENT
(sold separately)
8 AA alkaline batteries Traxxas Top Fuel ™
see page 18
Small flat-blade screwdriver
for tuning (1/8 inch blade)
After-run oil to protect
the engine from corrosion
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
Glow plug and
wheel nut wrench
4-way wrench U-joint wrench
1.5mm “L” wrench 2.5mm “L” wrench
Turnbuckle wrench
Body clips and
body washers
Foam air filter oil
see page 19
Various pre-load spacers and shock
pistons (on parts tree) see page 29
Fuel dispensing bottle EZ-Start Controller
Extra
glow plug
NiMH 7.2V
battery pack*
NiMH 7.2V battery
charger*
44054-1-KC2216-R00_Nitro_Slash_Owners.indd 5 9/11/14 4:15 PM