Traxxas 37054-1 - Manual (Page 5)

TRAXXAS • 5
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
2.0mm “L” wrench 1.5mm “L” wrench Turnbuckle wrench U-joint wrench
SUPPLIED TOOLS AND EQUIPMENT
4 AA alkaline
batteries
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
• Soldering iron
For more information on
batteries, see Use the Right
Batteries on page 13.
Optional Gearing †
see page 25
Aftermarket servo
adapters
Various pre-load spacers and shock
pistons (on parts tree) see page 24
Battery pad (to reduce battery
vibration, if necessary)
NiMH battery charger*
Body clips and body
washers
4-way wrench
7-cell NiMH battery pack with
Traxxas High-Current Connector*
REQUIRED EQUIPMENT
(sold separately)
*Battery and charger style are subject to change and may vary from images. †Gear selection varies by model
2.5mm “L” wrench
3-way flat wrench