Toa WT-4820 - Manual (Page 8)

* 1 May not included with the unit marketed in your country. In this case, prepare it locally. Please consult your
TOA dealer in advance for details of the adapter.
* 2 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC adapter*
1 .............................................. 1
Rod antenna ............................................... 2
Rubber foot ................................................ 4
• Optional products
Antenna:
YW-4500
Mounting bracket kit: MB-WT3 (for rack mounting one WT-4820 unit)
MB-WT4 (for rack mounting two WT-4820 units)
Power Source AC mains (an AC adapter* 1 must be used.)
Power Consumption 250 mA (12 V DC, when operating with two tuner modules)
Receiving Frequency 576 – 865 MHz (576 – 606 MHz and 614 – 698 MHz for USA/Canada)
Mixing Input –20 dB* 2 , 10 kΩ, unbalanced, phone jack
Audio Output Mixing/Solo 1 (selectable):
–20 dB* 2 (+6 dB* 2 Max.), 600 Ω, unbalanced, phone jack
–14 dB* 2 (+12 dB* 2 Max.), 600 Ω, balanced, XLR-3-32 type connector
Solo 2: –20 dB* 2 (+6 dB* 2 Max.), 600 Ω, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Indicator ANT A/B, Audio (peak), Power
Signal to Noise Ratio Over 102 dB (A-weight, balanced output)
Harmonic Distortion Under 1%
Frequency Response 50 Hz – 18 kHz, ±3 dB
Operating Temperature –10°C to +50°C
Operating Humidity 30 % to 85 %RH
Finish Resin, black
Dimensions 210 (w) x 44 (h) x 181 (d) mm
Weight 770 g (without tuner module)
11. SPECIFICATIONS
Rubber foot
(supplied with unit)
0 10
0 10
ANT A
ANT B
PEAK VOLU ME
CHANNEL
TUNE R 1
ANT A
ANT B
PEA K
VOLUM
E
CHAN NEL
TUNER 2
ON OFF
POW ER
DIV ERS ITY W IR ELE SS T UN ER W T-48 20
10.2. Desktop Mounting
Attach the 4 supplied rubber feet to the bottom surface
of the unit when installing the unit on the desk.
133-07-228-2B
URL: http://www.toa.jp/