Toa TS-918 - Manual

TS-918 ExpanSion uniT
inSTRuCTion ManuaL
Thank you for purchasing TOA’s Expansion Unit.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. SaFETY pRECauTionS
• Before installation or use, be sure to carefully read all the instructions in this section for
correct and safe operation.
• Be sure to follow all the precautionary instructions in this section, which contain important
warnings and/or cautions regarding safety.
• After reading, keep this manual handy for future reference.
Indicates a potentially hazardous situation which, if mishandled,
could result in death or serious personal injury.
WaRninG
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CauTion
WaRninG
When installing the unit
• Do not expose the unit to rain or an
environment where it may be splashed by
water or other liquids, as doing so may
result in fire or electric shock.
• Use the unit only with the voltage specified
on the unit. Using a voltage higher than
that which is specified may result in fire or
electric shock.
• Do not cut, kink, otherwise damage nor
modify the power supply cord. In addition,
avoid using the power cord in close
proximity to heaters, and never place heavy
objects -- including the unit itself -- on the
power cord, as doing so may result in fire or
electric shock.
• Avoid installing or mounting the unit in
unstable locations, such as on a rickety
table or a slanted surface. Doing so may
result in the unit falling down and causing
personal injury and/or property damage.
When the unit is in use
• Should the following irregularity be found
during use, immediately disconnect the
power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no
further attempt to operate the unit in this
condition as this may cause fire or electric
shock.
· If you detect smoke or a strange smell
coming from the unit.
· If water or any metallic object gets into the
unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged
(exposure of the core, disconnection, etc.)