Cabletron Systems 9A426-01 - Manual (Page 13)

11
9A426-01/9A426-02 Module Specific Information
Adding PVCs to the Connection Table
To add a PVC to the Connection Table:
1. Go to the Add/Delete Entry Screen.
2. Use the arrow keys to move the cursor to the VPI field.
3. Enter the number of the VPI you want to add, then press the Tab key.
4. Enter the number of the VCI you want to add, then press the Tab key.
5. Press the Space Bar to select the AAL type.
6. Press the Tab key.
7. Press the Space Bar to select the Encapsulation Type.
8. Use the arrow keys to highlight ADD , then press the Return key.
The message “ENTRY ADDED” is displayed.
Deleting PVCs From the Connection Table
To delete a PVC from the Connection Table:
1. Go to the Add/Delete Entry Screen.
2. Use the arrow keys to move the cursor to the VPI field.
3. Enter the number of the VPI you want to delete, then press the Tab key.
4. Enter the number of the VCI you want to delete, then press the Tab key.
5. Use the arrow keys to highlight DELETE, then press the Return key.
The message “ENTRY DELETED” is displayed.