Rear, Bottom, Caution – Toa IR-801AF User Manual
Page 5
5
[Rear]
[Bottom]
CONTROL OUT
TO IR-802T
TO IR-820SP
DC24V
H C
E
AUDIO OUT
MADE IN TAIWAN
4
5
6
7
4. Audio output terminal
Outputs the Channel A’s audio signals while
the IR-310M’s Function button is being
pressed.
5. Control output terminal
Provides a closed contact while the IR-
310M’s Function button is being pressed.
6. IR-820SP connection terminal*
Connect this terminal to the IR-820SP
Infrared Wireless Speaker using a Category
5 cable (straight type).
7. IR-802T connection terminal*
Connect this terminal to the IR-802T Infrared
Wireless Tuner using a Category 5 cable
(straight type).
*
Notes
• Use a Category 5 plenum cable (straight type) when routing the cable in locations where
plenum-rated cable is required.
• Cross type cables cannot be used.
To avoid damage to the unit and/or connected equipment:
· Never connect the IR-820SP or IR-802T connection terminal to a
PC or LAN.
· Never short-circuit the terminal to ground.
CAUTION
8
8. Marking plate
Shows the Manufacturer's name, Model
name, and Electrical rating.