Specifications – Classe Audio CP-500 User Manual
Page 42
42
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response
DC – 200kHz ± 0.1dB
Distortion (THD + noise)
0.003%
Maximum input voltage (single-ended)
5Vrms
Maximum input voltage (balanced)
10Vrms
Maximum output voltage (single-ended)
10Vrms
Maximum output voltage (balanced)
20Vrms
Gain range
-100dB to +14dB
Input Impedance (balanced)
200kΩ
Input Impedance (single-ended)
100kΩ
Output Impedance (main output)
100Ω
Signal-to-noise ratio (ref. 10Vrms input)
110dB
Channel separation
better than 110dB
Crosstalk (any input to any output)
better than -120dB @ 1kHz
Rated power consumption
30W
Idle power consumption
29W
Mains voltage
determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
Overall dimensions
Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
Net weight
26lbs (12kg)
Shipping weight
33lbs (15kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet:
http://www.classeaudio.com
email: [email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.