TL Audio PA-1 - Manual (Page 12)

Power Requirements:
Rear panel selectable for 220-240V 50Hz or 110-120V 60Hz
operation.
Rear panel fuse 20mm, 1AT.
Power consumption 30VA typical.
Detachable 3 pin IEC connector, mating connector and cable
supplied.
Front panel On/Off switch with green LED.
Dimensions:
19” rack mounting, 2U high.
483mm wide x 88mm high x 205mm deep.
Weight: 5.8Kg.
In line with a policy of continuous development, the above specifications are subject to change without
notice.
SERVICE
Should the unit require service, it must be taken or posted to an authorised dealer.
Please retain the original packing for possible future use, and ensure the unit is
suitably protected during transit. The manufacturer cannot accept responsibility for
damage caused during transportation.
The unit is protected by a limited warranty for a period of one year from the date of
purchase. During this period, any faults due to defective materials or workmanship
will be repaired free of charge. The warranty excludes damage caused by deliberate or
accidental misuse, operation on the incorrect mains voltage, or without the correct
type and value of fuse fitted. It is the user’s responsibility to ensure fitness for purpose
in any particular application. The warranty is limited to the original purchase price of
the equipment, and excludes any consequential damage or loss.
Please record the following details:
Serial Number.............................
Date purchased...........................
Dealer.........................................