TL Audio C-1 - Manual (Page 15)

Dynamic Range:
106dB.
Distortion:
THD+N: 0.05%, 10Hz-40KHz.
IMD: 0.03%.
(Line input at 0dBu and 0dB gain with compressor in, after 10 minute warm up time).
Sidechain Insertion Points:
Unbalanced, switched 3 pin jack socket, tip = send,
ring = return.
Nominal level -2dBu.
Output impedance 47 ohms.
Return input impedance 10Kohms.
Power Requirements:
Rear panel selectable for 220-240V 50Hz or 110-120V 60Hz
operation.
Rear panel fuse 20mm, 1AT.
Power consumption 30VA typical.
Detachable 3 pin IEC connector, mating connector and cable
supplied.
Front panel On/Off switch with green LED.
Dimensions:
19” rack mounting, 2U high.
483mm wide x 88mm high x 205mm deep.
Weight: 6Kg.
In line with a policy of continuous development, the above specifications are subject to change without
notice.