TL Audio 5013 - Manual (Page 16)

HM Band:
+/-15dB at 1KHz to 12KHz.
Q variable 0.8 to 7.
HF Band:
+/-15dB at 3KHz to 20KHz.
Q variable 0.8 to 7.
Switchable to shelving mode.
“FAT” Response:
Predefined EQ contour, maximum +/-3dB, 10Hz to
40KHz.
Distortion:
Predominately second harmonic, increasing with
“Drive” level. Typically 0.5% @ 0dBu.
Drive LED:
Increasing intensity to reflect valve drive,
commencing at +4dBu to full brightness at +14dBu
(Output Level at 0dB).
Peak LED:
+20dBu. Monitors Input, Post EQ and Output
Levels.
Noise:
-82dB, ref +4dBu Input and Output, EQ ON with all
controls centred.
Dynamic Range: 106dB.
Power Requirements:
Internally set to 230V 50Hz or 115V 60Hz
operation.
Detachable IEC power cord.
Consumption 25VA.
Dimensions:
19” Rack mounting, 2U high.
W x D x H = 483 x 200 x 88mm (19.0” x 7.9” x
3.5”).