Cobra Digital DC360 - Manual (Page 7)

6
2. Press the Shutter Button once within 5 seconds to delete all the photos
stored in the camera.
Note: If you don’t press shutter button within 5s,the operation of deleting the
photos in camera will not be executed, and the camera will return to the normal
working state.
Photo Resolution Selection
Note:
The resolution status will always show on the LCD display in small character.
1.
Press “Function button” to select “Hi” or “Lo” character show on LCD.
2. “Hi” means SXGA mode 1280*960 pixels; “Lo” means VGA mode 640*480
pixels.
3. When you press the “Function Button” once to switch between the “Hi” and
“Lo” mode. The Hi mode will allow you to take about 26 photos and the Lo
mode will allow you to take about 104 photos.
Photo Storage
The photo can be taken will vary referring to the resolution and compression ratio.
The LCD display will always show the status of resolution and the photo number
has taken unless the Select Button is pressed. The highest storage of photos will
be:26 photos --- “Hi” resolution 104 photos --- “Lo” resolution
Press the Shutter Button to take one photo and the photos taken will be displayed
as a digit on the LCD display. Each consecutive photo taken will increase the
photo number by one digit. As the following:
Note: Each time you change the resolution; the number of photo you have taken
will not change.