THORENS TD 700 User Manual

Page 18

Carefully take the record player and its accessories out
of the carton and check if each of the following items has
been supplied:

Loop the drive belt around the sub-platter and motor
pulley (Fig. 1). Carefully put the main platter, depression
beneath, onto the sub-platter.

Please make sure that no oil or greasy substances can
get onto the belt and the transmission area of the sub-
platter. If necessary, both parts may be cleaned with an
alcoholic dilution added to a lint-free cloth.

1 x User manual
1 x Plinth with sub-platter and tonearm
1 x Thorens drive belt
1 x Platter with felt mat
1 x Dust cover
1 x Tonearm counterweight
1 x External mains adapter
1 x RCA interconnecting leads with

ground wire

1 x Adaptor for single records

Attach dust cover to the hinges at the rear side of the
plinth – Your record player is now completely mounted.

IMPORTANT: It is highly recommended to save the ship-
ping box and all packing material in case the record player
needs to be packed again for transportation. Thorens can-
not be held responsible for any damage that may occur
during transport on the ground that the record player has
not been properly packed.

Fig. 1