THORENS TD 209 - Manual (Page 27)

The turntable can be levelled by adjusting the three
plinth feet from above with the help of the 5-mm hex
key.
➔ Fig. 4
The platter speed can be adjusted by turning the ad-
justment screws on the bottom of the speed switch unit.
➔ Fig. 5
The platter speeds are factory-adjusted. Any readjust-
ment of the speeds should be checked with the help
of a test record or a strobe disc.
Please also refer to “Belt Tension”
➔ Page 25
27
Turntable adjustments
Fig. 4
Fig. 5
45
33
TD 209 TD 206