The Shrunks Outdoor Tuckaire Kids Travel Bed - Manual (Page 3)

have formed under the patch. You can use any round object, such as a spoon, starting in
the center and then working outwards towards the edges.
E. Place heavy object on repaired area to keep patch firmly in place for 30 minutes – the
drying period.
F. Once dry, you can inflate the unit. Do not expose the repair to sun or rain until repair has
been completed.
WARNINGS
- This is not a lifesaving or personal flotation device!
- Only use under competent adult supervision!
- Never leave children unattended.
- Only use if you are willing to accept the risks!
- Always inspect product for any unsafe conditions before use!
- Always have sufficient distance between the inflatable and other objects!
- When using, keep in mind that tipping is possible!
- Never set up or use the product in or near a swimming pool!
- Always stay in control and no wild playing while using the inflatable!
- Do not use the inflatable while under the influence of alcohol or drugs!
- Remove any sharp objects such as a watch or chain before using the inflatable!
**While every attempt is made to embody the highest degree of protection in all equipment,
we cannot guarantee freedom from injury. The user assumes all risk of injury due to use. All
merchandise is sold on this condition, which no representative of the company can waiver
or change.
THE DO AND DO NOT’S
DO supervise children at all times while they are using the product.
DO retain instructions with the product.
DO inspect product before each use.
DO instruct children on the proper use of product.
DO require children to remove shoes before use.
DO allow only 1 child at a time to use the Inflatable Bed.
DO keep pets away from the product.
DO instruct children not to attach items to the product that are not specifically designed for
use with the equipment, such as but not limited to, jump ropes, clothesline, pet leashes,
cables and chains as they may cause a strangulation hazard.
DO NOT place product near fire.
DO NOT allow children to jump onto or off of the product.
DO NOT allow other toys on top of the product.
DO NOT allow helmets, headgear, loose clothing, scarves, hoods, or clothing containing
drawstrings when using this product.
CLEANING
If your inflatable bed is used intensively, then it should be cleaned on a weekly basis. It is
also important to clean and dry the product before it is packed away.
- When cleaning your product never use strong detergents or silicone-based products.
- Also never use high pressure cleaning equipment such as a “pressure washer”.
This will result in damage to your product.
- Clean the outside surface only
- Clean your Inflatable Bed with soap and fresh water and check that the valves are clean
and not damaged.
STORAGE
When storing your Inflatable Bed, keep it in a clean and dry place that is not affected by
major variations in temperatures and other damaging factors. You can store your Inflatable
Bed deflated and rolled up or lightly inflated. Be careful never to stack anything on top of
Inflatable Bed.
REPAIRS
All of the inflatable products include repair kit patches. You can easily repair minor
punctures and cuts. This kit includes 2 round pieces of self-adhesive material to patch the
inflatable bed;
Conditions necessary for successful repair:
Relative humidity less than 65 % / Temperature Range between 63°-77° Fahrenheit (17°-
25°) Celsius. Avoid completing repairs in direct sunlight or rain and ensure that the material
is fully deflated and lies flat.
A. First, you need to locate the hole. The easiest way is to fully inflate the product and listen
for a leak, or to spray with soapy water and look for bubbles. You then need to deflate the
product.
B. Cut out a round patch to required size depending upon hole/puncture; at least
0.75’’ larger than the hole.
C. Clean the damaged part and surrounding area of the product with soap and water and
allow to dry thoroughly. Wipe the damaged part and surrounding area with fingernail polish
remover, or rubbing alcohol, and allow to dry thoroughly.
D. Apply the patch over the hole, covering the cut. Press out the air pockets which may