Calibre UK K40 - Manual (Page 2)

SELECTABLE DRIVER SETTINGS-
REMOTE CONTROL
HIGHWAY MODE
When Calibre is in HIGHWAY mode, it will provide
full sensitivity and warnings to all FCC allocated
police radar bands and technology. Upon selecting
this mode, Calibre will provide a voice confirmation
that states, "HIGHWAY."
ADVANCED CITY MODE
When Calibre is in CITY mode, it will virtually
eliminate false alerts by removing all X-band radar
signal warnings, the most common source of
non-police radar signals. This mode also engages a
filter system that is designed to reduce other weaker
non-police signals while remaining on total top alert
for police radar. Upon selecting this mode, Calibre
will provide a voice confirmation that states, "CITY."
OFF MODE
When Calibre is in OFF mode, the system is turned
off and it will not receive or report radar signals.
Upon selecting this mode, Calibre will provide a
voice confirmation that states, "K40 OFF." Calibre
will stay in the OFF mode, even after restarting your
vehicle, until you place the system in the CITY or
HIGHWAY mode through the Remote Control.
VOICE MODE
When Calibre is in VOICE mode, each radar warning
is accompanied by a voice alert indicating what
direction the signal is coming from, front or rear, and
the band of radar that was detected (e.g. "FRONT KA
BAND" or "REAR K BAND"). On models that only
feature a front radar receiver, only the band identifi-
cation will be stated. Upon selecting this mode,
Calibre will provide a voice confirmation that states,
"VOICE MODE."
TONE MODE
When Calibre is in TONE mode, each radar warning
is accompanied by a unique tone sound for front or
rear alerts. On models that feature a single radar
receiver, tones are the same regardless of the
direction of the signal. Upon selecting this mode,
Calibre will provide a voice confirmation that states,
"TONE MODE."
HIGH VOLUME
When Calibre is in HIGH mode, the audio volume
will be at its loudest setting. This mode is ideal for
convertibles, vehicles with loud audio systems, or
those with hearing difficulty. Upon selecting this
mode, Calibre will provide a voice confirmation that
states, "VOLUME HIGH."
LOW VOLUME
When Calibre is in LOW mode, the audio volume
will be at its quietest setting. Upon selecting this
mode, Calibre will provide a voice confirmation that
states, "VOLUME LOW."
MUTE VOLUME / LIGHTS ONLY MODE
When Calibre is in MUTE mode, all radar warning
audio will be turned off except in the case of
instant-on radar or Laser. When radar is detected, only
visual light warnings are provided. Upon selecting this
mode, Calibre will provide a voice confirmation that
states, "LIGHTS ONLY."
Congratulations! Your new Calibre Remote Radar &
Laser System is the world's finest total protection
system against speeding tickets. Please take a moment
to fully review this Owner's Guide to acquaint
yourself with the controls and features of this
revolutionary technology.
INITIAL WAKE-UP SEQUENCE
Your K40 Calibre Remote Radar & Laser System is
designed to turn on with the ignition. After starting
your vehicle, Calibre will flash both of the blue
warning LED lights three times in sequence (models
with one radar receiver have only one blue LED),
followed by the voice confirmation, "K40 ON," letting
you know the system is operational.
OPERATING THE
REMOTE CONTROL
IMPORTANT: After starting the vehicle, please allow
30 seconds for your Bluetooth network to connect
before changing the settings.
There are eight driver selectable settings on the
Remote Control. The three buttons located at the
bottom will allow you to adjust the settings for your
Calibre system. The left button lets you place Calibre
in CITY or HIGHWAY mode, or turn the system OFF.
The center button enables you to select either VOICE
or TONE alerts. And the right button allows you to
adjust the volume to HIGH, LOW, or full time MUTE.
To change a setting, simply press and release any of
the three selector buttons to activate the Remote
Control. Once activated, the status LEDs on the
Remote Control will illuminate. While the LEDs are
illuminated, you can move between the settings by
pressing the appropriate selector button.
NOTE: The Remote Control is powered by two
AAAA batteries. If you need to change the batteries,
simply remove the back panel of the Remote
Control. You can do this by pushing the button
release on the bottom panel with a pen or
small pointed object. Duracell
® AAAA batteries
are the approved battery replacements for the
Remote Control.
Press to select between
Highway or Advanced
City modes or turn the
system Off.
Press to select between
Tone or Voice modes.
Press to select between
High or Low volume
modes or activate full
time Mute.
Modifications to the Calibre system not expressly approved by the
manufacturer could void the user's FCC granted authority to operate
the equipment.