Cobra Electronics Pro 9680 - Manual (Page 12)

Settings
Your Detector
Nothing comes close to a Cobra ® 19
Settings
Your Detector
18 English
Pop Alert
Pop Alert will alert you of Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect off.
To Turn Pop Detect Mode On Or Off Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
go to Pop Detect. Tone Visual Display
Two (2) beeps Pop On
One (1) beep Pop Off
Pop Detect On
Pop On
Pop Detect Off
Pop Off
To Turn VG-2 Detect Mode Off Or On Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
go to VG-2 Detect. Tone Visual Display
One (1) beep VG2 Off
Two (2) beeps VG2 On
To Turn VG-2 Audio Mode Off Or On Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
go to VG-2 Audio. Tone Visual Display
One (1) beep VG2 Audio Off
Two (2) beeps VG2 Audio On
VG-2 Detect Off
VG2 Off
VG-2 Detect On
VG2 On
VG-2 Audio Off
...Audio Off
VG-2 Audio On
...Audio On
VG-2 Alert
The detector is undetectable by VG-2 detection devices and will alert you
when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show VG-2 Alerts. With VG-2 Detect mode on, you can also
choose whether or not you want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect on and VG-2 Detect Audio on.