Cary Audio Design CAD-211M - Manual (Page 8)

8
factory without a Return Authorization Number from the Customer Service Department.
Cary Audio Design will not assume responsibility for transit damage or loss if problems
are due to improper packing or lack of insurance.
WARNINGS
Make no attempt to put the CAD-211M in service outside
of the cabinet. Contact with high voltages found in the unit
can be fatal!!!
Completely remove AC Power Cord from the wall and
allow 30 minutes for the high voltage capacitors to
discharge through bleeder resistors before attempting to
change tubes or clean the inside of the amplifier.
CAUTIONS
Never remove/insert AC Plug when the unit is on or the AC
Power Switch is in the “ON” position.
Obstruction of the top portion of the CAD-211M will
result in tubes overheating.
OBSERVE DIRECTIONS IN THIS MANUAL