Sure Heat 2008 Surefire SF308LP - Manual (Page 9)

Grill Assembly
9
STEP FOUR
a. Remove parts from inside grill hood, then tilt the Grill
Head Assembly (4A) onto it's back.
WARNING: Keep hands and fingers away from grill hood
when moving Grill Head Assembly. Grill hood is loose
and will open and close when moving into place.
b. Loosen the four (4) grill mounting bolts so that there
is approximately 1/4” between the bolt head and grill
bottom.
c. Have someone help you pick up the grill head.
d. Make sure the four (4) bolts fall through the large
opening in the “key hole” slots in the cart sides.
e. Slide the grill forward in the “key hole” slots until the
back of the grill head matches the cart back. Check on
the inside of the cart to make sure that both sides of
the grill are flush with the cart.
f. Install four (4) self-tapping screws into the top front and
right cart flanges.
g. Tighten the four (4) grill head mounting bolts
underneath the grill to secure the grill to the cart.
4A
Close view for Step 4f