Sure Heat 2008 Amana AM26 - Manual (Page 20)

ASSEMBLY INSTRUCTIONS
Step 13: Assemble Igniter Module
E
A
A. Igniter module
B. Side burner igniter wire
C. Main burner igniter wires
D. Igniter push button
E. “AA” size battery
B
C
D
1. Unscrew the igniter button cap from the igniter module.
2. Install battery into battery compartment, negative (-) end in first.
3. Screw igniter push button cap on.
4. Connect loose igniter wires from the grill to the open terminals of the igniter.
Note: The igniter is designed in such a way that it does not matter which terminal tab
is used when connecting igniter wires
.
20