Sunny Health & Fitness P8000 - Manual (Page 6)

5
Note
1. If you have an inaccurate reading on the monitor, please replace the battery immediately (please
see below instructions.“
Battery Exchange Instructions
1“ Take off the plastic cap.
2“ Push the battery out by tool/finger.
3“ Insert the new battery in by tool/finger. Please make
sure the anode (with words“ is on the top.
4“ Cover the battery with the plastic cap.
5“ Connect the wire onto the meter.
6“ Insert the meter on Base Frame (2“.
2. Please use (1“ LR44, 1.5V battery.
3. The monitor is auto-powered. It turns on when exercise begins, and it turns off when no
movement is made between 4 to 5minutes.
4.
All functions will automatically stop calculating when a stop sign appears in the upper left corner
of the display monitor. This occurs when there is no signal for a period of 4 seconds. Once the
exercise begins again, the meter will automatically start recalculating and the stop sign will
disappear.
5