Sunny Health & Fitness P8200 - Manual (Page 8)

Step 3:
A. Connect the bottom of the Tension control wire (10) with the Tension
control (3) and connect the Sensor wire (8) with Trunk line (2).
*
NOTE
: Please make sure the Tension control (3) is at the lowest tension level before you begin.
This will ensure the wires are at their longest reaching points to make the connection easier.
B. Insert the Handlebar post (5) to the Main frame (9) fixing with 4 sets Screws
(7) and Arc-washers (6).
C. Attach the Stretch pipe (32) to the Saddle tube (31), then insert the Saddle
tube (31) to the Main frame (9) fixing with Knob (34).