Sunny Health & Fitness SF-RB925 - Manual (Page 7)

7
STEP 5:
Connect the pulse wires b (35) with the handle pulse wire (20) first. Then fix the handlebar (4) to
the seat bracket (3) with carriage bolts (16), washers (22) and acorn nuts (11).
STEP 6:
Attach the pedals (7L/ 7R) to the crank (5) respectively.
To tighten the LEFT pedal; you must screw counter-clockwise; it is reversed threaded.
The RIGHT pedal tightens by screwing clockwise.
IMPORTANT: FAILURE TO FOLLOW PROCEDURES MAY RESULT IN PERMANENT
DAMAGE TO YOUR BIKE.