Computer functions – Sunny Health & Fitness SF-E902 User Manual
Page 5
Function Button : Press red button to select functions of time, count, total count, calories. Hold the
button for 4 seconds to have a total reset (except TOTAL COUNT).
SCAN : Press “mode” key to select “scan”. This function will automatically scan through all
the functions displayed on the bottom line of the monitor.
TIME : Automatically accumulates workout time when starting exercise.
COUNT : Automatically accumulates workout counts when starting exercise.
TOTAL COUNT : Automatically accumulates different sessions workout counts when starting
exercise. TOTAL COUNT will be reset by replace the battery.
CALS : Automatically accumulates calories amount consumed when starting exercise.
1. If there is an improper display on the monitor, please replace the battery to improve results.
2. Please use one AAA (1.5V) battery as a power supply.
3. The monitor will be automatically shut off if there is no signal coming in for 4 to 5 minutes.
4. The monitor will be auto-powered when you start to exercise, or you can push button to signal in.
5. When there is no signal coming in for a period of 4 seconds, all functions will automatically stop calculating
and a “stop” sign will appear on the upper left corner of the monitor.
6. The meter will automatically start calculating by simply starting to exercise and will automatically stop
calculating when exercise stops for 4 seconds.
COMPUTER FUNCTIONS:
NOTE:
4
:
:
:
:
:
: