SunBriteTV SB-WM46NA - Manual (Page 8)

SB-WM46NA Installation Instructions
8
4. Use four removed screws and washers to secure interface
brackets (B and C) to back of display. (See Figure 8)
Figure 8
Display Installation
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the SB-WM46NA up to (and
including) the display does not exceed 175 lbs (80 kg).
1. Place the display on the wall plate (A) by hooking the hooks
of the brackets (B and C) in the top of the wall plate. (See
Figure 9)
2. Secure the display by sliding the latches, one on each side,
inward. As the latches are slid in, it will lower and catch the
bottom hook and secure the television in place. (See Figure
9)
3. If desired, install self tapping screws (F) and/or padlocks
(not provided) for additional security. (See Figure 9)
4. Tilt the display up or down as desired.
5. Loosen or tighten knobs to achieve the desired tension.
4 x 4
Figure 9
(F) x 2 (optional)
1
1
2
2
3
3