Studio Projects B3 Mic Clip - Manual (Page 5)

Adjusting the tension on a Studio Projects B1 mic clip
FIGURE 5 OF 5
You can then tighten the tension of the clip by turning the tension
adjustment screw clockwise with a large flat-blade screwdriver (a U.S. dime
works well in a pinch too). Do this to both sides of the mic clip.
Voila! No more droopy B1 mic!
You can then press the covers back onto the clip again if you want, or
leave them off for easy future tension adjustments.
Written March 3, 2003 by Kid Klash, a happy B1 owner! [email protected]