StarTech.com RKCONS1916EU - Manual (Page 7)

Instruction Manual
4
3. Tighten the screws that were loosened in Step 1:
4. Install the remaining rail, repeating Steps 1-3.
5. Slide the Module onto the Console side rails, connecting the Module and
Console using the male Centronics connector provided by the Console, and the
female Centronics connector provided by the Module. Ensure the connection is
secure, and that the module is firmly seated within the Console side rails.
6. Gently, but firmly insert the Console (with Module attached) into the left and
right rails:
7. Unlock the console, and pull the left and right rail-lock switches towards you
simultaneously, and hold them in this position while pushing the console into
the cabinet:
Rail Lock Switch