Speeco S24044000 - Manual (Page 13)

SPECIFICATIONS
ORDERING INFORMATION
Tractor Category Category 1 or 2
Gear Box Special alloy pinion gears and tapered roller bearings on both sides of each gear
Gears Heat-treated to Rockwell C30-40 to a depth of .030-.040
Driveline Equipped with quick-tach yoke to fit standard 6-spline PTO (completely shielded)
Cutting edges Beveled, high carbon steel, replaceable
Augers 6 in., 9 in. and 12 in. sizes available that all dig to a full depth of 45 in. Anti-auger
plates to prevent it from screwing into soft soils
Boom 2-7/8 in. O.D. high strength tubing
A-frame 2-7/8 in. high strength tubing
Safety shields On driveline, gear box "U" joint and gear box output shaft
Shear pin On input shaft to protect driveline, auger and gears. Replaceable.
Part No. S53010300
PART NUMBER DESCRIPTION
S24044000 Model 65 post hole digger less auger
S240515A0 6 in. auger with screw point and replaceable cutting edges
S240525A0 9 in. auger with screw point and replaceable cutting edges
S240535A0 12 in. auger with screw point and replaceable cutting edges
S24059200 Screw point
S240567ZBO 6 in. cutting edge set
S240579ZBU 9 in. cutting edge set
S240589ZBU 12 in. cutting edge set