Sound Oasis S-560-03 - Manual (Page 8)

Page 6 Sound Oasis®
Turning the Alarm On & Selecting Wake-up Sounds
To turn the alarm “On”, simply move the Alarm Sound selector switch
(located on the top of the unit above the Clock Display) to Buzzer for a
buzzer alarm, or to Sounds for a nature sound alarm (see Setting Alarm
Sounds for more details). When the alarm is turned “On”, the Alarm On
Icon [
] will be visible on the right side of the Clock Display.
Note:
To wake to a nature sound alarm, the unit’s Rotary On/Off Volume
Control must be turned ON. If the Rotary On/Off Volume Control
is turned ON, sound playback can still be stopped with the 30, 60,
90-minute timer function or by the Snooze•Off/Resume Button.
Setting Alarm Sounds
You can wake to a buzzer or any one of the six (6) built-in nature sounds.
If you are using a Sound Card, you may also wake to any one of the six
(6) Sound Card sounds (so long as the Sound Card Button is in the ON
position).
Note:
If you choose to wake to a nature sound, your unit will play whatever
nature sound was last played.
Turning The Alarm Off
The alarm can be turned off by:
Moving the • Alarm Sound selector switch to the Alarm Off
position. The Alarm On Icon [ ] will disappear from the Clock
Display to show that the alarm is OFF.
Pressing the • Snooze•Off/Resume Button.
(See Snooze Cycle for more details)
HW_S-560-03_UserMan_ENG_02.indd 8 HW_S-560-03_UserMan_ENG_02.indd 8 9/25/08 10:31:24 AM 9/25/08 10:31:24 AM