Sound Oasis BST-100 - Manual (Page 6)

Page 10 Sound Oasis® Page 11 sleep better. feel better. live better
Listening To Sounds/Music From The Micro SD Card
You can enjoy sounds or music from your BST-100 from the included
preloaded MICRO SD CARD.
Playing Sounds from the Built-In Micro SD Card
Your BST-100 includes a MICRO SD CARD that contains preloaded Sound
Oasis sounds.
To play sounds/music from the built-in MICRO SD CARD, please
follow these steps:
1. Press and hold the POWER button down for 3 seconds.
2. Your BST-100 will enter the Bluetooth streaming mode by default (i.e. you
will hear a Bluetooth pairing mode “blip” and see the Bluetooth LED flash).
3. Exit the Bluetooth mode and enter the sound machine mode by
pressing the MODE button.
4. The SD LED will light up to indicate that you are now in the sound
machine mode.
5. The first sound on the Sound Oasis MICRO SD CARD will automatically
starting playing.
6. Press the – VOL + buttons to increase or decrease volume.
7. Press the >II button to pause and resume playback.
8. Press the >I button to skip to the next sound track.
9. Press the I< button to repeat the sound track.
Please note:
• For the exact sounds preloaded on your MICRO SD SOUND CARD, please
refer to the separate sound listing sheet included with your BST-100.
• Each preloaded Sound Oasis sound is 8 hours long so it plays throughout
the night. After playing through the 8 hour sound track, your BST-100
will automatically play the next sound track on the list.
Playing Bluetooth Streamed Sounds
Your BST-100 can also operate as a Bluetooth speaker so you can stream
new sounds/music to your BST-100.
To stream sounds/music from your Bluetooth enabled device (e.g.
your mobile phone, music player, PC/laptop) to your BST-100,
please follow these steps:
1. Press and hold the POWER button down for 3 seconds.
2. Your BST-100 will enter the Bluetooth streaming mode by default. The
Bluetooth LED on your BST-100 will blink to show that it is discoverable.
3. On your Bluetooth enabled device, turn Bluetooth on, locate the
Bluetooth device list and select the device named BST-100. Pair your
BST-100 with your Bluetooth enabled device.
4. The Bluetooth LED will light up on your BST-100 and you will hear a
Bluetooth pairing mode “blip” to indicate that you are in the
Bluetooth streaming mode.
5. Press play on your Bluetooth device to play the streamed music/sound
if the music/sound does not automatically start playing.
6. Press the – VOL + buttons to increase or decrease volume.
7. Press the >II button to pause and resume playback.
8. Press the >I button to skip to the next sound track on your music list.
9. Press the I< button to repeat the sound track playback.
Please note:
• You can only pair one Bluetooth device at a time.
• If pairing fails, please turn your BST-100 off and then on again and
retry pairing.