Clarity C510 - Manual (Page 17)

Flash
Flash is a feature that enables you to
answer a call if you have call waiting.
Please contact your local telephone
company for information on subscribing
to this feature. Pressing the FLASH but-
ton while you are having a phone con-
versation will pick up the second con-
versation and place the first call on hold.
Press the FLASH button again to contin-
ue your conversation with the first
caller.
Last Number Redial
Redial allows you to automatically redial
the last telephone number you called
(up to 32 digits).To use this feature, lis-
ten for dial tone and press the REDIAL
button once. Your call will be dialed.
The last number dialed will be stored in
the Clarity 510 for you until you dial
another phone number or disconnect
the telephone from the wall jack.
Headset Jack
The unit includes a 2.5 mm headset jack
for connection of a headset. In the
headset mode, the volume of the head-
set is controlled adjusting the Clarity
Power Dial.
Headset Operation
Press the HEADSET button to enable
the headset mode. Dial as normal.
The HEADSET button will illuminate
to indicate the phone is in the
headset mode.You may switch
between headset and handset
usage by toggling the HEADSET
button.
Ordering a Headset
In the event you wish to purchase a
headset for your Clarity 510,
please contact Plantronics at 1-800-
544-4660 for location near you.
We recommend using the
Plantronics M110 headset.
Neckloop Jack
A 3.5 mm jack is available for connect-
ing a neckloop.The volume to the neck-
loop is controlled by the telephone.
When the neckloop is plugged in, the
handset is disabled.
Hearing Aid Compatibility
The handset has a special coil inside of
it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
Failsafe Power Operation
In the event of a power failure, you can
still make and receive calls, but the LCD
display, CID/PhoneBook operations,
Nightlite, and Extra Loud Ringer will not
function.The phone will ring, but not as
loud.
Operating Your Telephone
16